Toggle clamps

Product Details:

GN 820. STAINLESS. STEEL. INOX. RoHS. Horizontal acting toggle clamps. Steel / Stainless Steel, with horizontal mounting base. SPECIFICATION. Types.

Additional Information:

• Item Code: GN820
• Production Capacity: 100000
• Delivery Time: 10 TO 12
• Packaging Details: PLASTIC BAG

Product Details:

he clamping and control levers move in the same direction. When clamping is obtained, the control lever is in the vertical position. The light version of the series presented in this catalogue has a retaining force between 75 and 875 daN, while the heavy version has a retaining force between 1000 and 3000 daN. The heavy version is used when highly intense resistant forces are used, for example when closing jigs for foams, polyurethanes, etc.
The clamp of this series are built to be easily disassembled for reworking of the individual elements depending on the requirements of use.
PERFORMANCE FOR THE LIGHT SERIES: Components in case-hardening sheet steel. Hardened and tempered supporting pivots. Supporting bushes (for sizes from 130 daN and over) hardened by cementation and ground. The clamping lever is shorn and reinforced in the points of maximum stress. In the closing movement, it is guided laterally to ensure greater stability against possible transverse stresses. Finishing of the series: galvanized
FOR THE HEAVY SERIES: The pivots and supporting bushes are made of tempered and ground steel. The other parts are made of weldable steel. Finishing of the series: phosphated.
The red handles are made of polyurethane and are resistant to oils, solvents and other chemical agents.
In order to prevent accidental openings, caused by vibrations, some tools of this series are provided with a device called, "safety device", suitable for maintaining the clamp in a closed position. This device is also able to lock the tool in open position (Pat.Pend.)

Additional Information:

• Item Code: GN810
• Production Capacity: 100000
• Delivery Time: 10 TO 12
• Packaging Details: PLASTIC BAG

Product Details:

GN 820 horizontal acting toggle clamps work according to the toggle principle: lever and clamping bar move in the opposite direction. They require less space for the clamping action. In the clamped position the operating lever is in its horizontal position. Horizontal acting toggle clamps in the U-bar version with two flanged washers (Type M) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type MC. Type O version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 (see page 1630) clamp mounts to hold the work piece in place. - General information for toggle clamps (see page 1560)

Additional Information:

• Item Code: GN815
• Production Capacity: 100000
• Delivery Time: 10 TO 12
• Packaging Details: PLASTIC BAG

Product Details:

This series combines the advantages of toggle action (even in case of pressure loss the tool remains closed) with the possibilities offered by the pneumatics:
• Constant FS clamping force independent of the operation.
• Possibility of actuating several devices at the same time.
• Possibility of actuating various points; remote control performed also by machines.
• Several versions are available with magnetic cylinders that enable positioning control without contacts, to obtain electric command impulses in certain clamping situations.
The pneumatic series also contains vertical and push rod series with Fs clamping forces between 50 and 240 daN and Fh retaining forces from 70 to 450 daN for the light series; and Fs from 87 daN to 430 daN with Fh from 220 to 2000 daN for the heavy series. The use of a filter - reducer - lubricator group is essential for a long and smooth operation of the cylinder, while for a long duration of the mechanical components we recommend using suitable flow regulators and calibrating the speed of the motions desired, starting from a low speed and gradually increasing this speed. The cylinders of the heavy series (1000-2000/EPM/EPVM) already mount these flow regulators on the heads and they can be adjusted using a screw on the side of the air supply. Operating pressure between 2-6 bar. Ambient temperature -30° + 80°C. The Fs forces indicated in the catalogue were measured at a pressure of 4 bar.
PERFORMANCE
LIGHT SERIES: Components in case-hardening sheet steel. Hardened and tempered supporting pivots. Supporting bushes (for sizes from 200 daN and over) undergo case-hardening and grinding.
HEAVY SERIES: Base made of black varnished spheroidal cast iron. Other parts made of galvanized (weldable) steel. Supporting pivots undergo case hardening.
REINFORCED HEAVY SERIES: Base body made of black phosphated steel sheet; cemented and ground support pins and bushes. Double-acting cylinder with adjustable shock absorption. The tools of this series are built so as to be easily disassembled: the pivots are fixed axially with seeger rings.

Additional Information:

• Item Code: GN860
• Production Capacity: 100
• Delivery Time: 10 TO 12
• Packaging Details: PLASTIC BAG

Product Details:

SPECIFICATION Types - Type A: Flat spindle tip - Type B: Rounded spindle tip Version in Steel ST Spindle Steel zinc plated, blue passivated Hexagon nuts ISO 4035 Steel zinc plated, blue passivated Version in Stainless Steel NI Spindle Stainless Steel AISI 304 Hexagon nuts ISO 4035 Stainless Steel AISI 304 Pressure pad Rubber, Neoprene (CR) - 85 Shore A ≈ - vulcanized - black INFORMATION The two hexagon nuts are included parts of the order

Additional Information:

• Item Code: Au139
• Production Capacity: 100
• Delivery Time: 10 TO 12
• Packaging Details: plastic bag

Product Details:

In this series, the circular movement of the control lever is transformed into a linear movement of the push rod. Excepted for models 120/AS and 300/AS, this series works and clamps either by pushing or pulling. The light version meets clamping requirements from 80 to 720 daN, while the heavy series from 120 to 4500 daN.
PERFORMANCE
For the light series: Push rod, guide sleeve and other parts in galvanized sheet steel. The main feature of the ASD/ASS models is the low force application point as well as the very reduced encumbrance in the vertical. Models 80-165-340/AS have the possibility of front mounting with an external thread that enables rotation of the control lever to the most favourable position for use. The bracket increases the range of applications. For the heavy series: Based made of black varnished brass for size 70. Base made of forged black varnished steel for the other sizes. Components in galvanized case hardening sheet steel. Galvanized steel push roods. Supporting bushes and pivots undergo case hardening.

Additional Information:

• Item Code: GN840
• Production Capacity: 100
• Delivery Time: 10 TO 12
• Packaging Details: PLASTI BAG

Product Details:

A wide range of metal elements for locking parts in the most varied applications on equipment and industrial machines. Elesa+Ganter machine elements range presents the most traditional components for the mechanical market: screws, thrust pads, ring, washers and nuts together with vibration-damping elements, transfer units for idle handling in technopolymer, lifting accessories and the brand new transmission elements in engineering plastics.

Screw Steel

• Tensile strength class 5.8

• blackened

Thrust pivot

• Brass MS

• Plastic (Polyacetal POM) KU

Additional Information:

• Item Code: GN913.3
• Production Capacity: 1000
• Delivery Time: 10 TO 12
• Packaging Details: PLASTIC BAG

Product Details:

Toggle Clamps | Latches | Additional Locking Mechanism | Automotive Clamps | Pneumatic Toggle Clamps | Swing Clamps | Accessories

Toggle Clamps - Buy from Largest Collection of Horizontal Handle Toggle ,Vertical Handle Toggle Clamps, Clamps, Latch Type Toggle Clamps,

Additional Information:

• Item Code: 815
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100
• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: PLASTIC BAG