The direct drive position indicators can be used on control spindles in any position: the indicator is mounted directly on the driveshaft and is connected to the machine by a rear pin. Available in three different sizes to adapt to the dimensional requirements of the machine which it is intended and with burnished steel or AISI 304 bushings. The position indicators can be mechanical or electronic type and the reading can via mechanical digits, or provided directly by an electronic digital display.
The electronic position indicators (two sizes available), powered by internal battery, allow an absolute positioning or incremental reading. Thanks to the available functions and programmable parameters, a single unit can be used for multiple applications that require different pitches of the control shaft, rotation directions or measuring units. Transparent polymer windows with lenticular effect ensure a high level of readability and provide a tight seal (IP65 or IP67).
Product Details:
Minimum Order Quantity | 10 Unit |
Brand | ELESA+GANTER |
Display Type | Digital |
Model | DD51 |
Color | C2 RAL 2004 orange glossy finish.C3 RAL7035 grey,glossy finish. C1 RAL 7021 grey-black |
ORANGE | glossy finish |
orangeglossy finishgrey glossy finish grey black | High resistance polyamide based PA techno polymer Black base |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Display Type | Analog, Digital |
Brand | ELESA+GANTER |
Model Number/Name | MBT-50,70 |
Color | BLACK |
Dial Type | Aluminium Anodised |
Material | Polycarbonate Body |
Position indicators with positive drive can be used on spindles in any position. They can be matched to appropriate Elesa handwheels or knobs. Reading of the positive drive indicators can be analog or analog-digital. Each complete turn of the large pointer (red) corresponds to a fraction of a turn of the small pointer (black).
The number of turns of the red pointer to make a full turn of the black pointer is the indicator ratio. Dials are available for all standard ratios in configurations with clockwise or counter-clockwise graduation. Ultrasonically welded windows ensure cases are seal to meet IP 65 protection requirements.
Additional Information:
Product Details:
Minimum Order Quantity | 1 PER EACH |
Brand | Eleas+ganter |
Shape | Round |
Display Type | Analog |
Model Name/Number | DD 50 |
Color | C3 RAL 7035 grey, glossy finish |
Window | ransparent polyamide based (PA-T) technopolymer |
Internal gasket | O-ring front sealing in NBR synthetic rubber, between the case and the boss. |
Weight | 22 grams. |
Standard execution | Bushing with 10 mm H7 reamed hole |
High-resistance polyamide based (PA) technopolymer.
Black base.
Case in the following colours:
The ultrasonically welding between the base and the case prevents separation and avoids dust penetration.
WindowTransparent polyamide based (PA-T) technopolymer, moulded over the case and with a perfect seal. Resistant to solvents, oils, greases and other chemical agents (avoid contact with alcohol during cleaning operations).
DisplayIt indicates the displacement of the mechanism controlled by the spindle from the start position (0).
Three-digit roller counter. The digits of red rolls show the decimal values.
The display can be in different positions (see "Example of description for ordering").
O-ring front sealing in NBR synthetic rubber, between the case and the boss.
Rear gasketFoam polyethylene, supplied.
Standard executionBushing with Ø 10 mm H7 reamed hole, fitting to shaft by means of a supplied grub screw with hexagon socket and cup end, included in the supply.
22 grams.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Shape | Round |
Display Type | Analog |
Operated Type | Battery Operated |
Voltage | 220 V |
Internal gasket | O-ring front sealing in NBR synthetic rubber,between the case and the bushing. |
Rear gasket | Foam polyethylene |
Weight | 42 grams. |
Base and case:-
High-resistance polyamide based (PA) technopolymer.
Black base.
Case in the following colours:
C2: RAL 2004 orange, glossy finish.
C3: RAL 7035 grey, glossy finish.
C1: RAL 7021 grey-black, glossy finish.
The ultrasonic welding between the base and the case prevents separation and avoids dust penetration.
Window:-
Transparent polyamide based (PA-T) technopolymer, moulded over the case and with a perfect seal. Resistant to solvents, oils, greases and other chemical agents (avoid contact with alcohol during cleaning operations).
Display:-
It indicates the displacement of the mechanism controlled by the spindle from the start position (0).
Four-digit roller counter. The digits of red rolls show the decimal values. An additional graduated scale next to the last decimal digit offers further accuracy of the reading.
The display can be in different positions (see "Table of the possible combinations").
AN: inclined display, counter in the upper position.
AR: inclined display, counter in the lower position.
FN: front display, counter in the upper position.
FR: front display, counter in the lower position.
Standard executions:-
Boss with Ø 14 mm H7 reamed hole, fitting to shaft by means of a grub screw with hexagon socket and cup end, included in the supply.
DD51: black-oxide steel boss.
DD51-SST: AISI 303 stainless steel boss.
The direction of rotation:-
D: clockwise. Increasing values with clockwise rotation of the boss.
S: anti-clockwise. Increasing values with the anti-clockwise rotation of the boss.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Shape | Round |
Display Type | Analog |
Model Name/Number | PA-01,PA-2,PA-05 |
Color | Zinc-plated steel. |
Bezel | AISI 303 stainless steel. |
Special executions on request | Special ratios |
Zinc-plated steel.
BezelAISI 303 stainless steel.
WindowGlass.
DialNatural matte anodised aluminium.
Clockwise (D) or anti-clockwise (S) graduation, black colour.
ReadingThe black pointer indicates the number of turns of the spindle from the start position (0); the red pointer indicates the fractions of turn.
RatioTo choose the ratio see "Positive drive indicators introduction"-.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | ELESA+GANTER |
Shape | Rectangular |
Display Type | Digital |
Model Name/Number | UC RF |
Color | RAL-7035 |
Material | ABS reinforced polycarbonate,self-extinguishing. |
Standard executions | UC-RF PROFINET IO control unit with Profinet IO serial interface |
Stander executions | UC-RF MODBUS TCP control unit with Modbus TCP serial interface. |
ABS reinforced polycarbonate, self-extinguishing.
Standard executionsUC-RF control unit can manage up to 36 position indicators. DD52R-E-RF-.
Compatible for mounting on DIN RAIL. Two LEDs (green and red) for correct diagnostics.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Display Type | Digital |
Color | Orange |
Usage/Application | Industrial |
Features | Multi Function Lcd With 5 Function Keys. |
ORANGE | Glossy Finish |
ORANGER | Ral-2004 |
Additional Information:
Product Details:
Display Type | Digital |
Brand | Elesa Ganter |
Model | 52 |
Color | Orange,Grey,Black |
dark black | glossy |
Grey | Glossy grey |
Direct drive digital position indicators can be assembled on passing through spindles in any position to give direct reading of the positioning of a machine component. They are suitable also for motor driven applications (see “Table of the possible combinations").
Ergonomy and designCompact roller counter, ergonomically designed digits for rapid reading. The readability of the counter is increased by the magnifying window.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Brand | Elesa+Ganter |
Shape | Round |
Display Type | Analog |
Model Name/Number | GA01-GA02-GA03 |
Color | Zinc-plated steel. |
Bezel | AISI 303 stainless steel. |
Dial | Natural matte anodised aluminium. Clockwise (D) or anti-clockwise (S) graduation,black colour |
Reading | The black pointer indicates the number of turns of the spindle from the start position (0); the red |
Zinc-plated steel.
BezelAISI 303 stainless steel.
WindowGlass.
DialNatural matte anodised aluminium.
Clockwise (D) or anti-clockwise (S) graduation, black colour.
ReadingThe black pointer indicates the number of turns of the spindle from the start position (0); the red pointer indicates the fractions of turn.
Ballrace rotation: maximum reading accuracy.
RatioTo choose the ratio see "Gravity position indicators introduction"-.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | ELESA+GANTER |
Shape | Round |
Display Type | Digital |
Model Name/Number | DD-52 E |
Color | orange,glossy finish.,grey,glossy finish. |
Keyboard | Polyester membrane. Resistant to solvents,alcohol,acids,alkalis |
High-resistance polyamide based (PA) technopolymer.
Black base.
Case in the following colours:
Available on request in RAL 7021 grey-black colour (C1)
Cover with perfectly sealed gasket and AISI 304 stainless steel UNI 6955 type self-tapping screws with six-lobe socket TORX® T06 (registered trademark by TEXTRON INC.).
The ultrasonic welding between the base and the case prevents separation and avoids dust and liquid penetration.
BossAISI 304 stainless steel with Ø 20 mm H7 reamed hole, fitting to shaft by means of AISI 304 stainless steel grub screw, hexagon socket and cup end UNI 5929-85, included in the supply.
WindowTransparent polyamide based (PA-T) technopolymer, moulded over the case and with a perfect seal. Resistant to solvents, oils, greases and other chemical agents (avoid contact with alcohol during cleaning operations).
DisplayThe visualization parameters can be set and modified by the operator by means of appropriate keys:
Polyester membrane. Resistant to solvents, alcohol, acids, alkalis.
Internal gasketO-ring front sealing in NBR synthetic rubber, between the case and the boss.
Brass bushing with double O-ring sealing in NBR synthetic rubber inside the rear cavity of the base (DD52R-E-SST-IP67).
Rear gasketFoam polyethylene, included in the supply.
Additional Information:
2.9/5
Rated by 10 Users