Latches

Product Details:

Latches with knob
In the family of the latches with knob, we include the lever and the cam in different production materials including self-extinguishing polymer AE-V0, zinc alloy and stainless steel. There are various knobs, in techno polymer, phenolic plastic or stainless steel that have five lobes, for safe and comfortable grip, or with wide step groove, for a quick recovery during rotation.
Some latches have different types of levers: flat, bent, with locking swing. In the same family are polymer locks: an innovative accessory for machine guards and industrial equipment. Also new are snap door locks, made of polymer, black or grey to suit better the aluminium profile on which they are installed. The door opening can be by use of a handle or through the use of the release lever which also constitutes as a handle grip.

Assembly instructions

The latch is inserted in the mounting hole of the door on the lever side (see picture) until the wings of the elastic washer snap in, ensuring complete fastening.

The latches are supplied with assembled lever for faster mounting.

Where needed, the latch can be disassembled from the inside of the door by means of a disassembling tool (to be ordered separately).

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 1000
• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: PLASTIC BAD

Product Details:

Features and applications

Close the door and move the lever to the closed position by rotating the handle by 90°. The overturning of the handle in its seat moves the spindle axially with the lever in the direction of the swing-door, until reaching the locking position.

The lock locks the handle in the folded position

CSMH latches with compression handle guarantee a clamping range from 13 to 75 mm.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A wide and varied range of plastic or metal Cam Door Lock with knob or key for the closure of control cabinets or machine doors. Also in the family are lever closures, for use on cupboard doors and doors subject to strong vibrations, interlock handles, to keep the door locked in the closed position and closures with pressure handles, particularly suitable for applications on generator sets.

The range is completed with toggle clamps and joints for manual or pneumatic control with toggle mechanism in galvanized steel, burnished or stainless steel.

Additional Information:

• Item Code: CM
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100
• Delivery Time: 10-12 days
• Packaging Details: PLASTIC BAG

Product Details:

Different types of latches with knob or key made in metal, stainless steel or technopolymer to lock control cabinets, panels or machine doors. The range includes also handles with latch available with colored caps and edge protection profiles to seal different types of profiles.

Additional Information:

• Item Code: PR-CH
• Production Capacity: 1000
• Delivery Time: 10-12 days
• Packaging Details: paper bag packing

Product Details:

Stop locks GN 702 are particularly suitable for light-weight applications not exposed to dynamic loads, e.g. for keeping drawers closed. To mount stop locks of Type C, bore holes as shown in the diagram below must be set in the attachment surface. These mounting holes are usually made by punching or with laser. For small series and steel sheets below 2 mm thickness, the sheet metal punches GN 123 (see page 1493) are the tool of choice. The mounting bore holes can also be made by drilling / milling

Additional Information:

• Item Code: GN702
• Production Capacity: 100
• Delivery Time: 10 TO 12
• Packaging Details: plastic bag

Product Details:

The smooth operation of the VISE ACTION® design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25") pull-up for environmental sealing in gasketed applications, and helps reduce or eliminate noise and rattles caused by vibration. Over-center latching resists accidental opening due to shock or vibration.

Additional Information:

• Item Code: E3
• Production Capacity: 1000
• Delivery Time: 30DAYS
• Packaging Details: PLASTIC BAG

Product Details:

Knuckle Catches And Tension Catches

Knuckle Catches and Tension Catches allow doors to be kept in a closed position preventing unintentional opening. They operate by simply being pushed into position. Sugatsune's Knuckle Catches and Tension Catches come with a wide variety of options including different holding forces, materials, and finishes.

Additional Information:

• Item Code: C882
• Production Capacity: 1000
• Delivery Time: 10 days
• Packaging Details: plastic bag

Product Details:

Features and applications
BPS ball-shaped door lock (ELESA patent) consists of a clamp to be fixed to a frame and a ball to be fixed to a door.
The clamp, in which the ball fixed to the closing door is inserted, is a mechanical stop device also to the door movement, thanks to its shape.
The screws, that fix the clamp and the ball respectively to the frame and to the door, are identical. Thus, making the assembly easier.
Under specific tests, the clamp showed constant performances for more than 20.000 cycles.
The ball-shaped door lock has been conceived for use with both shutter doors and sliding doors.
The minimum thickness for the profile suitable for use is 15 mm, while the distance between door and frame must be within 2.5 mm and 3.5 mm (fig.1).

Additional Information:

• Item Code: BPS
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100
• Delivery Time: 10 TO 12
• Packaging Details: PLASTC BAG

Product Details:

K2/K3/K4/K5 - Rotary Draw Latches. High working loads, convenient mechanical advantage, and compact size are common advantages that make these ...

Additional Information:

• Item Code: k3
• Production Capacity: 1000
• Delivery Time: 10-12 DAYS
• Packaging Details: plastic bag