Indexing elements

Product Details:

Indexing plungers, lock pins, spring plungers and cam action indexing plungers are designed to facilitate repetitive positioning operations on machines and equipment. Elesa+Ganter indexing plungers are made of steel, stainless steel or SUPER-technopolymer body and locking nuts, available with or without knobs in different shapes. Different threaded body sizes from M10 to M20 and plungers dimensions from 5 to 10 mm are available to satisfy all possible applications.

Additional Information:

• Item Code: GN615.2
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 1000
• Delivery Time: 10-12 DAYS
• Packaging Details: PASTIC BAG

Product Details:

Types

• Type A: with Plastic Knob, without lock nut

• Type AK: with Plastic-Knob, with lock nut

• Type AN: with Stainless Steel-Knob, without lock nut

• Type AKN: with Stainless Steel-Knob, with lock nut

• Type G: with threaded rod, without lock nut

• Type GK: with threaded rod, with lock nut

Version in Steel

• blackened

• Pin hardened

Version in Stainless Steel AISI 303 NIPin chemically nickel platedKnob Type A / AK

• Plastic (Polyamide PA)

• black, matt

• not removable

Knob Type AN / AKN

• Stainless Steel AISI 303

• not removable

Additional Information:

• Item Code: GN617

Product Details:

Spring plungers GN 615 are used as detents as well as for push-on and push-off applications and ejecetors.
Types

• Type K: Steel, standard spring load

• Type KS: Steel, high spring load

• Type KN: Stainless Steel, standard spring load

• Type KSN: Stainless Steel, high spring load

Type K / KS

• Housing Steel, blackened

• Ball Steel, 1.3505, hardened

Type KN / KSN

• Housing Stainless Steel AISI 303

• Ball Stainless Steel AISI 420C, hardened

SpringStainless Steel AISI 631Marking of Type KS / KSN:Housing with 2 longitudinal markings

Additional Information:

• Item Code: 615
• Production Capacity: 1000
• Delivery Time: 10-12 DAYS
• Packaging Details: PLASTIC BAG

Product Details:

Types

• Type A: with lifting ring, without lock nut

• Type AK: with lifting ring, with lock nut

• Type B: without rest position (Knob), without lock nut

• Type BK: without rest position (Knob), with lock nut

• Type C: with rest position (Knob), without lock nut

• Type CK: with rest position (Knob), with lock nut

• Type D: with wire loop, without lock nut

• Type DK: with wire loop, with lock nut

Threaded body

• Version in Steel zinc plated, blue passivated ST

• Version in Stainless Steel AISI 303 NI

PinStainless Steel AISI 303SpringStainless Steel AISI 301Lifting ring / Wire loopStainless Steel AISI 301Knob Plastic (Polyamide PA)

• black, matt

• not removable

Additional Information:

• Item Code: GN717
• Delivery Time: 10-12 WORKING DAYS
• Packaging Details: PLASTIC BAG

Product Details:

Indexing plungers with threaded body with or without knob. Available also with ... PMT.100 Indexing plungers SUPER-technopolymer body. Compare Compare.

Additional Information:

• Item Code: PMT200
• Production Capacity: 100
• Delivery Time: 10 TO 12
• Packaging Details: PLASTIC BAG

Product Details:

Indexing plungers, lock pins, spring plungers and cam action indexing plungers are designed to facilitate repetitive positioning operations on machines and equipment. Elesa+Ganter indexing plungers are made of steel, stainless steel or SUPER-technopolymer body and locking nuts, available with or without knobs in different shapes. Different threaded body sizes from M10 to M20 and plungers dimensions from 5 to 10 mm are available to satisfy all possible applications.

Additional Information:

• Item Code: GN615
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 1000
• Delivery Time: 10-12 days
• Packaging Details: PLASTIC BAG

Product Details:

Why Hygienic Design?

In the food industry, medical technology and the pharmaceutical industry, product safety and consumer protection are becoming increasingly important. Due to their specific properties, standard parts in Hygienic Design can assist the production process in these sensitive areas and facilitate the manufacture of products with a long shelf life, which are free from preservatives.

Advantages of Hygienic Design

Less and shorter cleaning work (this can be up to 25 % of the production time), therefore

• more time available for production

• less fresh water consumption

• lower energy consumption

• less cleaning agent required

• less production of waste water

• lower total costs and saving of resources

Legal basis of Hygienic Design

EN 1672-2:2009 “Food machinery”

Machines must be able to be cleaned, i.e. they must be designed and constructed so that dirt can be removed with the recommended cleaning methods.

Machinery directive 2006/42/EC

Machines must be designed so that

• materials can be easily and fully cleaned before each use and

• no risk of infections or illness is created.

DIN EN ISO 14519:2008-07

Hygiene requirements for the design of machines

DIN EN 1672:2009-07

Food machinery – General design principles – Part 2

Additional Information:

• Production Capacity: 1000
• Delivery Time: 10-12 DAYAS

Product Details:

Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.

Additional Information:

• Item Code: 617
• Production Capacity: 1000
• Delivery Time: 10-12 days
• Packaging Details: PLASTIC BAG

Product Details:

56 - Spring-Loaded Plungers

56 Spring-Loaded Plungers provide convenient installation and removal of components. Activated with a simple “pull,” these plungers offer simplified positioning of sliding component and quick-release for easy removal. The 56 series provides design flexibility for limited space applications, and can be used as a locator pin in sliding applications or quick-release hinge pin for removable doors or drawers.

Additional Information:

• Item Code: 56-spring-loaded-plunger
• Production Capacity: 1000
• Delivery Time: 10-12 days
• Packaging Details: plastic bag

Product Details:

GN 717 Indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Additional Information:

• Item Code: 717
• Production Capacity: 1000
• Delivery Time: 10-12 days
• Packaging Details: PASTIC BAG

Product Details:

Owing to its shape, the lifting ring of the indexing plungers GN 413 can be used both as a screw-in assist during assembly or as indexing lock (Type C / Type CK).Indexing plungers with rest position are used when the indexing pin is temporarily not allowed to protrude. After the pin is pulled in, turn the pull ring by 90°. The ring is held in position by an indexing notch.

Additional Information:

• Item Code: GN413
• Production Capacity: 1000
• Delivery Time: 10-12 days
• Packaging Details: PLASTIC BAG

Product Details:

Cam action indexing plungers GN 612 are used in cases where the locking pin must not protude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.

Additional Information:

• Item Code: GN612
• Production Capacity: 1000
• Delivery Time: 10-12 days
• Packaging Details: plastic bag

Product Details:

Indexing plungers, lock pins, spring plungers and cam action indexing plungers are designed to facilitate repetitive positioning operations on machines and equipment. Elesa+Ganter indexing plungers are made of steel, stainless steel or SUPER-technopolymer body and locking nuts, available with or without knobs in different shapes. Different threaded body sizes from M10 to M20 and plungers dimensions from 5 to 10 mm are available to satisfy all possible applications.

Additional Information:

• Item Code: GN1707
• Production Capacity: 100
• Delivery Time: 10-12 days
• Packaging Details: PLASTIC BAG

Product Details:

Stainless Steel-Ball lock pins AISI 630, with plastic-knob GN 113.6 ELESA+GANTER®. Discover the product specifications and technical features.

Additional Information:

• Item Code: GN113.6
• Production Capacity: 1000
• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: PLASTIC BAG

Product Details:

Keeping in mind ever-evolving requirements of our respected clients, we are providing a premium quality range of Steel Indexing Plungers.

Additional Information:

• Item Code: 816
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 1000
• Delivery Time: 10-12 days
• Packaging Details: plastic bag